While using the Toshiba rice cooker, you may encounter some cases where the machine reports errors with strange symbols when the cooker is damaged. Below is how to fix Toshiba rice cooker error C14 that you should know to avoid serious damage!
1. Decode the rice cooker error C14
When used Toshiba rice cookeryou may encounter a situation where the pot reports some symbols such as C10C14, E02. That’s when the rice cooker tells us that something is wrong, maybe because the rice cooker has some kind of problem, so the manufacturer has anticipated and installed symbols to let us know so it’s easy to warranty, maintain, and repair without having to waste time finding errors. Or it could also be due to improper use, so the product warns to pay attention, ensuring the most effective, safe and best use of the rice cooker. The phenomenon of rice cooker error C14 is due to high voltage mode, exceeding 125 V.
2. How to fix Toshiba rice cooker error C14
During the use of home electronic appliances kitchen multi-function, rice cookers are prone to many errors. Therefore, when error C14 appears in a Toshiba rice cooker, you should immediately check the power source. The high-frequency cooker is used at a standard voltage of 100v-110v, so error C14 appears when the input voltage is greater than 125V.
Instructions on how to fix Toshiba rice cooker error C14
Similar to error C14, Toshiba rice cooker reports error F2, which means the temperature sensor is unstable, you should turn it off or replace another sensor.
4. Summary of Toshiba rice cooker error codes
Any brand of rice cooker has errors after long periods of use. Below is a list of Toshiba rice cooker error codes for your reference:
Summary of Toshiba rice cooker error codes
Error code
Interpretation of error codes
The pot reports error C
C10/E13
Open the vent cover abnormally. You should check the bottom air vents after pressing the “OFF” button.
C11
The inner pot sensor cannot detect the temperature.
C12
The pot lid sensor cannot detect temperature.
C13
The outer lid has been opened for a long time while keeping warm.
C14
High voltage mode exceeds 125V AC
The pot reports error E
E0
Disconnect
E1
Disconnect the thermistor
E2
Contact with side thermometer
E3
Disconnect the thermo voltage cap
E4
Thermal contactor exposure
E01/F01
Pan temperature sensor error
E02/F02
Pan temperature sensor is unstable
E03/F03
Disconnect the temperature sensor
E04/F04
Temperature sensor disconnect cap
E05/F05
The lid temperature sensor is unstable
E06/F06
Short cap for temperature sensor
E07/F07
Disconnect the IGBT temperature sensor
E(12~18)
Ability to disconnect
E08/F08
There is a sudden change in temperature while keeping warm
E09/F09
Possibility of causing short circuit
E10/F10
The inverter cannot operate and cannot be heated
E11/F11
Abnormally high pressure exceeding 125V
E12
The fan does not rotate or the power supply voltage falls below AC 70V.
The pot reports error F
F12
The IH correction value deviates outside the upper and lower limits during cooking
F13
Detection of abnormally high temperature of the coating during the insulation process
F14
The PC control board needs to be replaced.
F25
Temperature sensor abnormal
F26
The temperature sensor does not increase during cooking.
With the instructions to help you fix Toshiba rice cooker error C14 above, Websosanh I hope they will be useful to you, because whether the product line is in the high-end segment or the rice cooker is in the mid-range segment, they all have such errors during use. As long as you know how to handle and fix it, you can use the product for a long time and reliably.
https://orcid.org/0009-0009-1599-2739
