How to save money when using an iron

Choose to buy an iron:

You should choose irons with non-stick properties with a power level of 1000w -1200w as the most appropriate, because these types of irons not only help you iron easily but also save energy consumption when ironing.

When testing the iron, use electric test pen Touch the cover to check. If the tester light does not turn on and there is no tingling feeling when touching the iron cover, it means there is no electric leakage.

Electrical wires (iron wire and electrical outlet wire) must be of the type with greater load capacity iron capacity. For the iron’s wire, it usually must be a 3-core copper soft wire, rubber insulated and covered with cotton. It is best to choose an iron with a double-insulated cord. For socket wires, you should choose high-capacity sockets and wires from reputable brands.

Use the iron properly:

When using the iron, you need to adjust the temperature knob, return the knob to 0 when not in use.

When waiting for use, leave the iron upright. Absolutely do not leave the iron in operating mode to go out.

With a steam iron, if you want to add water to the iron, do not immerse the iron in water. You must unplug the power plug from the electrical outlet, then turn the adjustment knob to 0, tilt the iron backwards, and pour water into the water tank, but not too full. You must choose very clean water to put in the iron, otherwise you will have to spend a lot of time cleaning the stains on the iron surface.

You should not increase or decrease the heat suddenly, but first choose the highest heat to iron thick clothes, then you can turn off the electric current and take advantage of the remaining heat to iron thinner clothes.

When you discover that the iron is having problems such as not turning on power, or the indicator light is flickering, it’s best to get it repaired. When the power cord is damaged, it should be replaced with the correct type of wire from the manufacturer.

“Tip” when the iron is rusty:

Heat the iron and iron it over and over again on a damp cloth to remove rust.

Wait for the iron to cool, apply a little toothpaste, then wipe gently with a clean velvet or elastic cloth.

Be careful not to use sandpaper or a knife to scrape off the rust, as this will remove the plating on the iron’s surface, affecting the longevity of this item.

“Tips” to save electricity:

Do not iron during peak hours.

Gather items to iron at once (you can iron them at once at the beginning of the week or on the weekend) to take advantage of the continuous heat of the iron.

Sort clothes before ironing: you should put together fabrics of the same or nearly the same material to iron at the same time. After turning off the power, use the remaining heat on the iron to continue ironing thin clothes such as silk, silk, or handkerchiefs.

When ironing, you should set the iron temperature appropriate for each type of fabric.

If not necessary, do not iron clothes while they are still wet, because it will take a large amount of electricity to dry the clothes.

Do not iron clothes in the room air-conditionerbecause the ambient temperature will affect the temperature of the iron, resulting in more power consumption than in a normal room.

Before ironing clothes, clean the metal surface of the iron, this will help the iron work more efficiently.