Simple and detailed way to reset Electrolux washing machine for beginners

Skip to main content in article (See)

Sometimes the Electrolux washing machine may freeze and cannot operate, the simplest thing you need to do is to reset the Electrolux washing machine. Immediately refer to the following steps that anyone can do.

1. How to reset Electrolux washing machine

If your Electrolux washing machine is being used but experiences one of the 7 signs below, it is likely that your washing machine is stuck, cannot operate and needs to be reset immediately:

  • The washing machine hangs
  • Electrolux washing machine screen reports errors E10, E20, E40, E90, EHO,…
  • The buttons on the washing machine’s control panel do not work. Even if you press a function, the washing machine still stands still
  • Electrolux washing machine door is stuck and cannot be opened
  • The washing machine does not run or the washing drum does not spin
  • The water supply to the washing drum is unstable and the water supply time is longer than usual
  • The washing machine’s control unit is too hot due to continuous use 24/24, so the machine freezes and freezes
Simple and detailed way to reset Electrolux washing machine for beginners
Electrolux washing machine hangs up (Photo: Dienmayxanh)

When your washing machine unfortunately encounters one of the above conditions, do so reset the Electrolux washing machine immediately to help the machine operate stably again, avoiding the risk of more serious damage.

2. How to reset Electrolux washing machine

How to reset Electrolux washing machine horizontal door Extremely simple that anyone can do. Below are the specific steps to reset the device:

  • Step 1: Drain all the water in the machine (if washing) and take out all the clothes inside to make the reset process go more smoothly.
  • Step 2: Make sure the power cord is connected to the power source. Press the ON/OFF button to turn on the machine
  • Step 3: Turn the knob to select the Spin/Rinse program.
Simple and detailed way to reset Electrolux washing machine for beginners
Reset Electrolux front-load washing machine (Photo: Dienmayxanh)
  • Step 4: Press and hold the START/PAUSE button for about 25-30 seconds until all lights on the control panel flash, indicating the machine has been successfully reset. At this point, the machine has returned to its original settings and the previous washing mode IC memory has also been erased.
Simple and detailed way to reset Electrolux washing machine for beginners
Press and hold the START/PAUSE button for 25-30 seconds (Photo: Dienmayxanh)

If after implementation reset Electrolux washing machine but the washing machine still does not work, you should contact Electrolux’s technical staff or warranty service center or purchase address for timely inspection and repair support.

3. Electrolux washing machines can be reset

The reset feature on Electrolux washing machines is not equipped with all of the company’s washing machine models. Below are popular Electrolux washing machine models equipped with this reset feature:

  • Electrolux EWP85752 7Kg front-load washing machine
  • Electrolux EWP85742 7Kg front-load washing machine
  • Electrolux EWP10742 7Kg front-load washing machine
  • Electrolux EWF10843 8kg front-load washing machine
  • Electrolux EWF10932 9Kg front-load washing machine
  • Electrolux EWF10932S 9Kg front loading washing machine
  • Electrolux EWW12842 washer dryer washes 8kg + dries 6kg

If your washing machine is one of the above models, you can perform the following operations How to reset Electrolux washing machine as instructed in section 2. Note, you should not abuse the reset function of the device too much because it can reduce the life of the device. The way to minimize damage is to make sure to use the washing machine properly to prevent unwanted problems from arising.

In addition to the above models, some new Electrolux washing machine models may also be equipped with a reset function or have a faster way to reset the machine. To be sure, if your washing machine is not one of the above models, please review the instruction manual attached when purchasing the machine to get the most accurate information about the reset feature available on your washing machine.

4. Important notes to know before resetting the Electrolux washing machine

Before performing any reset operations on your Electrolux washing machine, you need to carefully consider the following notes:

Check the machine’s user manual

The most important thing before resetting is that you must always carefully read the user manual that came with the device to know exactly the specific information about it. How to reset Electrolux washing machine corresponding to your washing machine model.

Check warranty information

Review the machine’s warranty period. If your Electrolux washing machine is still under warranty, please contact Electrolux warranty and support services before taking any action to avoid the warranty being canceled.

Identify symptoms and causes of errors

Before performing a reset, check again for the signs and causes of the problem your washing machine is experiencing. If the errors your machine is having have simpler and safer remedies, try those first. Finally, if the solution cannot be resolved, perform the method of resetting the washing machine.

Restore important data if necessary

After resetting the washing machine, all data and information about previously programmed custom settings will disappear. Therefore, please backup and record important data before resetting (if necessary).

Contact the support service center

If you are not sure how to perform a reset or the problem your washing machine is having, please contact the Electrolux warranty service center or technician for the most accurate advice and support.

A very important note that users need to remember is that performing a reset cannot always completely solve the above problems and needs to be done carefully to avoid aggravating the problem of the device. internal engine.

The above is all of the Instructions for resetting Electrolux washing machine The most detailed and complete that Websosanh.vn wants to share with you. Each different washing machine line may have different reset methods depending on the design and model. Therefore, in addition to referring to the above instructions, you should still read more specific information in the machine’s user manual when purchasing. Hopefully the above information will help you solve all the problems you are facing.

Leave a Reply