Although quite simple, during use, users need to comply with a number of factors to best meet the needs of hot water bathing while still ensuring the necessary safety.
Indirect water heater Prime has good quality at a price range suitable for the budget of Vietnamese consumers, which is why it is favored by many people.
If you have Buy Prime water heater but don’t know how to use Prime water heater safely, the information below can help you.
An overview of the general structure of water heater Indirect Prime, inside the tank there is a heating rod and a magnesium anode reducing rod. For some dishonest stores, they can remove it to sell separately, so when buying, consumers should ask the sales staff to completely remove the inside of the tank to check the heating rod and magnesium rod.
The outside of the Prime water heater has a protective shell and electrical safety devices such as insulated wires, insulated wires, circuit breakers, relays, etc.
But in general, users do not need to pay much attention to the structure Prime hot and cold shower tankbecause during the installation process, the worker has guaranteed you the safety and usage factors hot and cold shower tank be easy.
2. How to use Prime hot and cold shower tank
In fact, during the installation process, most workers have set up a separate electrical switch for the water heater, so to use hot water when bathing, it is very simple, users just need to turn on the switch for the tank to start boiling water.
Depending on the capacity of the Prime water heater, it is 20 liters, 30 liters, or 50 liters… but after 10 – 15 minutes, users will have hot water to use. Before bathing, users just need to turn off the switch to ensure maximum safety.
Once there is hot water, users just need to move the shower head to different positions and use their hands to see if the water is warm enough for their needs. However, absolutely do not wipe to the end of that colored area, because boiling water can cause burns.
Users also need to be careful to ensure a clean water source, preferably tap water for the water heater. Do not use water sources with hard water content, which can cause residue to build up in the tank when used, and lead to the tank quickly being damaged.
3. Notes for using Prime hot and cold shower dispenser safely
To ensure safety while using Prime water heaters, users need to note the following points:
– When installing a water heater, users need to carefully read the instructions for use and ask people with expertise in installing water heaters to check whether the ground wire has been installed according to standards.
– If during use, the hot and cold shower tank has an electric leak, you need to ask a team of professional staff to check and fix it immediately, to avoid affecting the safety of the user.
– After using for a period of time, your family’s water heater may encounter phenomena such as electric leakage, rust, sediment… Therefore, after using for about the first month, you should open the tank and check the inside of the tank, then vacuum the residue, clean the tank and the filter inside. If your family uses clean water, you can check every 2 or 3 months, but if your family uses water with high sedimentation, you must check more often.
– While using the water heater, to avoid wasting electricity, you should not turn on the water heater 24/24 hours. Many people think that there is a relay in the tank that will automatically turn off the power, so the water heater will be turned on continuously 24/7. This will not only increase your family’s electricity bill, but also cause your water heater to overload and break down faster.
– Before using water, you just need to turn it on for 10-15 minutes then turn it off to have enough water. With large capacity water heaters, you can turn off the water heater before the last person enters the shower.
Hopefully with the above information, you have the experience to use Prime indirect water heaters safely.
Websosanh.vn – The first price comparison website in Vietnam
https://orcid.org/0009-0009-1599-2739
